DESIGN AND IMPLEMENTATION OF AN FPGA-BASED MOVABLE ROBOTIC ARM CONTROLLED WITH A MOBILE APPLICATION
Keywords:
FPGA-Based Robotic Arm, Mobile Application Integration, Object Identification, Agriculture Automation, Obstacle DetectionAbstract
The design and development of an FPGA-based movable robotic arm system with object identification capabilities and mobile application integration are presented in this paper. The main goal is to develop a versatile and effective proto type movable robotic arm that can be operated via a user-friendly mobile interface and has real-time application in agriculture field. The robotic arm's control logic is implemented through the use of a Field Programmable Gate Array (FPGA), which is advantageous due to its high processing speed and reconfigurability. Accuracy and reactivity are guaranteed by the FPGA, which controls the arm's exact movements. The control interface is with a smart phone application that gives users easy-to-use in the field. The robotic arm is outfitted with an obstacle detection module that uses an infrared sensor in order to facilitate autonomous operation. The robotic arm can carry out operations like weed, fruit cutting in the agriculture field.
References
Lab views 10, Implementation of Stepper Motor Controller, 2006.
Ying-Shieh Kung, Gua-Shieh Shu,” FPGA-based Motion Control IC for Robot Arm”, IEEE-2005, pp 1397-140.
Jasbinder Bhoot, Strategic Solutions Xilinx, Xcell Journal, Summer 2003.
Industrial Circuits Application Note ‘Drive circuit basics’, http://library.solarbotics.net.
Zhaojin Wen' Weihai Chen China, “Analysis of Two-Phase Stepper Motor Driver Based on FPGA” IEEE International Conference on Industrial Informatics 2006, pp 221-226.
Daniel Carrica, Marcos, A. Funes. Novel Stepper Motor Controller Based on FPGA Hardware Implementation, IEEE/ASME Transactions on mechatronics, Vol. 8 No. 1 March 2003, pp 1083-4435.
Giuseppe Casalino, Fabio Giorgi, Alessio Turetta, and Andrea Caffaz, “Embedded FPGA-based Control of a Multifingered Robotic Hand,” 2003 IEEE International Conference on Robotics & Automation, Taiwan, 2003, pp 2786-2791.
Kawahito, J-H. Park, K. Isobe, S. Suhaidi, T. Iida, T. Mizota, “A CMOS Image Sensor Integrating Column-Parallel Cyclic ADCs with On-Chip Digital Error-Correction Circuits”, IEEE.Feb.2008, pp 56-595.
S. B. Shafie, S. Kawahito, “A wide dynamic range image sensor with dual charge storage in a pixel and a multiple sampling technique”, Proc. SPIE Electronic Imaging 2008, vol.6816, pp 345-351.
Sung Su Kim and Seul Jung, “Hardware Implementation of a Real Time Neural Network Controller with a DSP and an FPGA”, Proceedings of the IEEE International Conference on Robotics and Automation. New Orleans, LA.2004, pp 4739-4644.
Swagat Kumar, Amit Shuklay, Ashish Duttaz and Laxmidhar Beherax “Technique for Visual Motor Coordination of a 6 DOF robot manipulator” “Intelligent Control Part of IEEE Multi-conference on Systems and Control” 1-3 October 2007, pp 544-549.
S. Kawahito, “CMOS Sensors for Smart and Advanced Imaging”, the 3rd Korean-Japanese Student Workshop, Oct. 2007
Downloads
Published
Issue
Section
License
Copyright (c) 2024 M. Venkata Subrahmanyam, T. Satya Savithri (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
