BY USING HELICAL BAFFLE ON THE ANNULAR SPACE OF A DOUBLE PIPE HEAT EXCHANGER TO IMPROVE THE HEAT TRANFER CHARACTERISTICS
Keywords:
Heat Exchanger, Helical Baffles, Analytical Method, Computation Fluid DynamicsAbstract
In this Project, the Design and Analysis of Performance of Double Pipe Heat Exchanger with and without helical baffles in both shell and tube side are investigated by using Analytical Method. The three-dimensional Computation Fluid Dynamics (CFD) model was designed using Solid Works Flow Simulation to analyze the conjugate Heat Transfer between the tube side and shell side of the heat exchanger. The analytical model was validated by CFD results. There are four type of heat exchangers analyzed in this work. Heat exchanger with helical baffle on both shell side and tube side gives the better results than the other type of heat exchanger. From the results obtained pressure drop and temperature difference were compared.
References
Anas El Maakoul, Azzeddine Laknizi, Said Saadeddine, Abdellatif Ben Abdellah, Mohamed Meziane, Mustapha El Metoui, Numerical design and investigation of heat transfer enhancement and performance for an annulus with continuous helical baffles in a double-pipe heat exchanger,Energy Conversion and Management 133 (2017) 76–86.
Václav Dvořák and TomášVít, Use of CAE Methods for Exergy-Economic Evaluation of Plate Heat Exchangers for Heat Recovery, KES-SEB 2018, SIST 131, pp. 127–137, 2019.
Dhansekaran S, Karunakaran S, Arthi S, Karnam Sriharshitha, 2013 .Compaision of Electricity generation from different waste water using Microbial fuel cell system. Online Journal of BioSciences and BioInformatics.4(3):203-215
ZhenyaDuana, Feng Shena, Xing Caoa, Junmei Zhang, Comprehensive effects of baffle configuration on the performance of heat exchanger with helical baffles, Nuclear Engineering and Design 300 (2016) 349–357.
HessamMirgolbabaei, Numerical investigation of vertical helically coiled tube heat exchangers thermal performance, Applied Thermal Engineering (2018).
Mohamad Omidi, Mousa Farhadi, Mohamad Jafari, A comprehensive review on double pipe heat exchangers, Applied Thermal Engineering 110 (2017) 1075–1090.
Usman Salahuddin, Muhmmad Bilal, Haider Ejaz, A review of the advancements made in helical baffles used in shell and tube heat exchangers, International Communications in Heat and Mass Transfer 67 (2015) 104–108.
M.R.Salem, M.K.Althafeeri, K.M.Elshazly, M.F.Abdrabbo, M.G. Higazy, Experimental investigation on the thermal performance of a double pipe heat exchanger with segmental perforated baffles, International Journal of Thermal Sciences 122 (2017) 39-52
Khashayar Sharifi, Morteza Sabeti, Mehdi Rafiei, Amir H Mohammadi, Laleh Shirazi, Computational Fluid Dynamics (CFD) Technique to Study the Effects of Helical Wire Inserts on Heat Transfer and Pressure Drop in a Double Pipe Heat Exchanger, Applied Thermal Engineering (2017).
Jian Wen, Huizhu Yang, Simin Wang, Xin Gu, PIV experimental investigation on shellside flow patterns of shell and tube heat exchanger with different helical baffles, International Journal of Heat and Mass Transfer 104 (2017) 247–259.
Shifan Yang, Yaping Chen, Jiafeng Wu, Huaduo Gu, Influenceof baffle configurations on flow and heat transfer characteristics of unilateral type helical baffle heat exchangers, Applied Thermal Engineering 133 (2018) 739–748
Downloads
Published
Issue
Section
License
Copyright (c) 2020 Vetriselvi E, Karunakaran S , Aswin P , Bala Nithish B , Sam Ponseelan G , Sanjay V (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
