FINITE ELEMENT ANALYSIS OF POWER TRANSFORMER
Keywords:
Partial Discharge, Power Transformer, Finite Element MethodAbstract
Failure in power transformer can be catastrophic to electric systems, since transformers play a vital role in the power sector. Metallic particles in transformer oil lead to Partial discharge which can result in serious conditions. The existence of conducting particle in the winding of a transformer accumulates electrical stress. Simulations are carried out for the electrical analysis of power transformer. The impact of this electrical stress on particle at different position has been analyzed in this paper.
References
N. Vasantha Gowri, M. Ramalinga Raju, B.P.Singh, “Analysis of Partial Discharge due to Movement of Spherical Particle in Power Transformer Using Computational Fluid Dynamics” International Journal of Engineering & Technology.
Mar Lar Myint, Yan Aung Oo, “Analysis of Distribution Transformer Design Using FEA”International Journal of Scientific Research Engineering & Technology (IJSRET), ISSN 2278 – 0882, Volume 3, Issue 4, July 2014
DU Zhi-ye, ZHAO Chun,RUAN Jiang-Jun,YU Shi-Feng YUN Wen-Bing, “Calculation Of Distribution Parameters For Researchon Propagation Characteristic Of Pdin Transformer Winding”.
Carlos M. Fonte Jose Carlos B. Lopes Madalena M. Diasrenato G. Sousa Hugo M. Campelo R. Castro Lopes, “CFD Analysis Of Core Type Power Transformers” 21st International Conference On Electricity Distribution Frankfurt, 6-9 June 2011Paper 0361Paper No 0361
N. Vasantha Gowri, M Ramlinga Raju, B. P Singh, “Monte - Carlo Simulation of Particle Movementin an Un-Energized Transformer” 2014 Annual Report Conference on Electrical Insulation and Dielectric Phenomena.
Linsuo Zeng, Peng Xiao, Shan Bai, Yan Wu, and Yuanhai Xia, “Analysis of Electric Field of HV Lead inUltrahigh Voltage Power Transformer”.
Shi Chen and Tadeusz Czaszejko, “Partial discharge test circuit as a spark gaptransmitter”IEEE Electrical Insulation Magazine May/June 2011- Vol. 27, No. 3pp.36- 44.
Yuan Li, Qiaogen Zhang, Yi Zhao, Tonglei Wang, Guangqi Liu, Ke Wang, “The Influence of Temperature on Partial Discharges and Wormhole Effect of Oil-paper Insulation under DC Voltage” 2017 Electrical Insulation Conference (EIC), Baltimore, MD, USA, 11 - 14 June 2017.
Kamran DAWOOD, Bora ALBOYACI, Mehmet Aytac CINAR, Olus SONMEZ, “Modelling and Analysis of Transformer using Numerical and Analytical Methods”.
Preethy V. Warrier, Preetha P.K., “Electromagnetic Analysis of Transformer Using Solidworks” 2015 IEEE International Conference on Technological Advancements in Power & Energy.
N. A. M. Amin, M. T. Ishak, M.H.A. Hamid, M. S. Abd Rahman, “Partial Discharge Investigation on Palm Oil Using Needle-Plane Electrode Configuration and Electric Field Distribution Using ANSYS Maxwell” 2017 International Conference on High Voltage Engineering and Power System, October 2-5, 2017, Bali, Indonesia.
Chao Tang, Song Zhang, Qian Wang and Jian Hao, “Thermal Stability of Modified Insulation Paper Cellulose Based on Molecular Dynamics Simulation”.
C. Thirumurugan, G.B. Kumbhar, “Effect of Electrode Configurations and Gap Spacings on Partial Discharge Characteristics of Oil-Pressboard Insulation System” 2015 IEEE 11th International Conference on the Properties and Applications of Dielectric Materials(ICPADM).
Sandeep Patel, “Mathematical Modelling of Disc Type Winding Of Transformer” International Journal of Engineering Research & Technology(IJERT) ISSN: 2278-0181 Vol.2 Issue 9, September – 2013.
Nor Azizah Mohd Yusoff, Kasrul Abdul Karim, Sharin Ab Ghani, Tole Sutikno, Auzani Jidin, “Multiphase Transformer Modelling using Finite Element Method” International Journal of Power Electronics and Drive System(IJPEDS) Vol. 6, No. 1, March 2015, pp. 56-64 ISSN: 2088-8694.
Downloads
Published
Issue
Section
License
Copyright (c) 2020 N. Vasantha Gowri , Zainab Akthar (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
